Friday, May 30, 2008

Converter, Interface, RS232/RS422 (RS485) (Aten)


Converter, Interface, RS232/RS422 (RS485) (Aten)

This bi-directional converter from Aten provides a hardware solution to the problem of converting signals between two serial standards. This converter can handle any RS-485/RS-422 device allowing it to function as either a short haul modem or interface converter.

Features

  • DCE/DTE Switch
  • Full / half duplex
  • Point to Point Multidrop
  • RATS signal data transmission control

Specification

  • DB-25 female
  • RS-485 / RS-422 four terminal block
  • RJ-11 connection
  • DCE, DTE and Monitor switch
  • TxON
  • RxON
  • T-RTS
  • R-/RTS
  • T-RTS
  • RxON switch
  • DC 9V 150mA (max) power
  • Max cable length 4000'
  • Up to 100Kbps data transfer rate
  • Plastic case

Buy Boosters Converters at www.worldofcables.com

Monday, May 12, 2008

Converter, Bi-Directional (Serial/Parallel) 256K (Aten)



Converter, Bi-Directional (Serial/Parallel) 256K (Aten)

Aten’s high performance reversible serial converter features both a DB-25 RS-232C (DCE) and a 36pin Centronics connection. With 512kb of memory, this quality unit can also serve as a print buffer. This unit supports both hardware and software (Xon/Xoff) handshaking.

Features

  • Compact Size
  • Dipswitches for direction setting
  • Easy installation

Specification

  • RS-232 (DCE)
  • DB-25 Female serial connector
  • Centronics 36 Male connector
  • Bi-directional data direction
  • 300-38400 bps baud rate
  • 7 or 8 data bits
  • 1 or 2 Stop bits
  • None, Odd or even parity
  • Power LED
  • Reset key
  • AC 9V 150mA
  • Plastic case

Buy Boosters Converters at www.worldofcables.com

Tuesday, May 6, 2008

Converter, Interface, RS232/RS422 (RS485) (Aten)


Converter, Interface, RS232/RS422 (RS485) (Aten)

This bi-directional converter from Aten provides a hardware solution to the problem of converting signals between two serial standards. This converter can handle any RS-485/RS-422 device allowing it to function as either a short haul modem or interface converter.

Features

  • DCE/DTE Switch
  • Full / half duplex
  • Point to Point Multidrop
  • RATS signal data transmission control

Specification

  • DB-25 female
  • RS-485 / RS-422 four terminal block
  • RJ-11 connection
  • DCE, DTE and Monitor switch
  • TxON
  • RxON
  • T-RTS
  • R-/RTS
  • T-RTS
  • RxON switch
  • DC 9V 150mA (max) power
  • Max cable length 4000'
  • Up to 100Kbps data transfer rate
  • Plastic case
Buy Boosters Converters at www.worldofcables.com

Wednesday, April 30, 2008

RS-232 to RS-422/RS-485 Bidirectional Converter (Cablesun)


RS-232 to RS-422/RS-485 Bidirectional Converter (Cablesun)

This bi-directional converter from Aten provides a hardware solution to the problem of converting signals between two serial standards. This converter can handle any RS-485/RS-422 device allowing it to function as either a short haul modem or interface converter.

Features

  • Automatic internal RS-485 bus supervision
  • No external flow control signals for RS-485 required
  • Transient suppression on RS-485 data lines
  • LEDs for easy status monitoring
  • Four wire full duplex; two wire half duplex
  • Minimum 2000V isolation protection
  • Up to 115.2 Kbps data throughput
  • DCE / DTE selectable

Specification

  • DB-25 female
  • RS-485 / RS-422 four terminal block
  • RJ-11 connection
  • DCE, DTE and Monitor switch
  • TxON
  • RxON
  • T-RTS
  • R-/RTS Switch.
  • DC 9V 900mW (max) power
  • Max cable length 4000'
  • Up to 115.2Kbps data transfer rate
  • Plastic case

Buy Boosters Converters at www.worldofcables.com



Tuesday, April 22, 2008

Converter, Serial to Parallel, High Speed (Aten)


Converter, Serial to Parallel, High Speed (Aten)

Aten’s High performance serial converter allows Centronics and RS-232 devices to communicate with each other. Simple DIP switch settings adjust transfer direction and baud rate. The baud rate can be set from 1200 to 115200bps, with support for hardware and software (XON/XOFF) handshaking.

Features

  • Easy installation
  • Non-powered
  • Compact Size
  • Dispatches for direction setting

Specifications

  • RS-232 (DCE)
  • DB-9 Female serial connector
  • Centronics 36 Male connector
  • Bi-directional data direction
  • 1200-921600 bps baud rate
  • Serial or parallel input interface
  • Parallel or serial output interface
  • Red power LED
  • ASIC micro controller

Buy Boosters Converters Cables at www.worldofcables.com

Monday, April 14, 2008

Converter, Bi-Directional (Serial/Parallel) (Aten)



Converter, Bi-Directional (Serial/Parallel) (Aten)

Connect your parallel device to serial port or serial device to parallel port. Aten’s high performance converter features both a DB-25 RS-232C (DCE) and a 36pin Centronics connection. This unit supports both hardware and software (Xon/Xoff) handshaking.

Features

  • Compact Size
  • Dipswitches for direction setting
  • Easy installation

Specification

  • RS-232 (DCE)
  • DB-25 Female serial connector
  • Centronics 36 Male connector
  • Bi-directional data direction
  • 300-38400 bps baud rate
  • 7 or 8 data bits
  • 1 or 2 Stop bits
  • None, Odd or even parity
  • Power LED
  • Reset key
  • AC 9V 150mA
  • Plastic case
Buy Boosters Converters at www.worldofcables.com

Friday, April 4, 2008

Video Extender Kit, Cat5, ( Local plus Remote ) (Aten)


Video Extender Kit, Cat5, ( Local plus Remote ) (Aten)

With this video extender kit from Aten, the distance between the PC and remote monitor can be up to 430'. Uses a local transmitting unit and remote receiving unit connected by Category 5 twisted pair Ethernet cable.

Features

  • Max video resolution 1600 x 1200
  • Reliable video transfer over category 5 Ethernet cable
  • Up to 430' transmission distance

Specification

  • VE-120L Connectors: HDB-15 Male input. HDB-15 Female, RJ-45 output
  • VE-120R connectors: RJ-45 Input, HDB-15 female output
  • Power LED
  • Max Res. 1024 x768
  • VGA, SVGA and MultiSync signal types
  • 500' Max distance
  • Metal case
Buy Boosters Converters at www.worldofcables.com