RS-232 to RS-422/RS-485 Bidirectional Converter (Cablesun)
 |
| |
This bi-directional converter from Aten provides a hardware solution to the problem of converting signals between two serial standards. This converter can handle any RS-485/RS-422 device allowing it to function as either a short haul modem or interface converter.
Features - Automatic internal RS-485 bus supervision
- No external flow control signals for RS-485 required
- Transient suppression on RS-485 data lines
- LEDs for easy status monitoring
- Four wire full duplex; two wire half duplex
- Minimum 2000V isolation protection
- Up to 115.2 Kbps data throughput
- DCE / DTE selectable
Specification - DB-25 female
- RS-485 / RS-422 four terminal block
- RJ-11 connection
- DCE, DTE and Monitor switch
- TxON
- RxON
- T-RTS
- R-/RTS Switch.
- DC 9V 900mW (max) power
- Max cable length 4000'
- Up to 115.2Kbps data transfer rate
- Plastic case
|
Buy Boosters Converters at www.worldofcables.com
No comments:
Post a Comment